Tyne Gangway has successfully completed stage 1 & 2 audits by SGS and have been recommended for registration to EN1090 Execution Class 2+
Registration will allow Tyne Gangway to CE mark their own fabrications
Today, Tyne Gangway have been awarded DNV_GL Type approval for our range of gangways up to 27mtrs in length and over-braced gangways upto 50mtrs.
Our design department has worked with DVN -GL Hamburg and their local office to approve the designs, which completes a two year project to gain approval of all TGs Accommodation Ladders & Gangways.
The DNV-GL Approval will be accepted by all IACS Classification Societies.
The approval paves the way to introducing Tyne Gangways new Range of SHALA, SALA & Shore Gangways, which will be stronger, lightweight and will exceed the requirements of current international regulations.
Tyne Gangway has completed its move to the new premises. The new fabrication facility is larger ensuring that our capability has grown and we are able to manufacture larger walk to work systems & bridges.
The New Fabrication Facility has three 10 tonne overhead cranes and five swing arm cranes enabling a 50% increase in production. The new offices have grown 3 fold. Our outside yard space has increased in size 4 fold enabling us to test & commission prior to dispatch.
We are please to announce completion of our latest offshore gangway system. The MaXccess P series gangway is a joint venture between Tynegangway and OSBIT Power.
The MaXccess-P35 system provides a safe and reliable means of transferring personnel to and from offshore platforms. The system is able to compensate for all 6 degrees of freedom between the vessel and target structure. This passive compensation of motions provides high sea state access with virtually no power consumption during operation. An accumulator system ensures the gangway can be lifted and stowed even in the event of power loss, ensuring no possibility of damage to the gangway or platform.
Tyne Gangway are pleased to announce that our accommodation ladders ranging in length from 2.5m up to 20.5m have gained type approval by DNV-GL. This is applicable for new builds and replacement ladders.
Tyne Gangways DNV-GL approved 50mtr bridge is installed, linking upper platform foundations so site works can begin. Please visit our gallery page for a photo of the installed bridge.
For many people the gangway or accommodation ladder is the first point of contact with a ship. Initial impressions are important, and a properly rigged ladder may be the first indication to a visitor that they are boarding a well run vessel.
However, someone obliged to climb a ladder which is unsteady, slippery or unsafe may have formed an unfavourable opinion of the ship and its crew by the time they have reached the top.
Gangway and Accommodation Ladder Incidents
Gangways and accommodation ladders may be hazardous if badly rigged, improperly tended or inadequately maintained. In spite of the acknowledged dangers, accidents associated with such shortcomings continue to arise.
In one incident three seamen sustained injuries, one seriously, after falling to the quay from an accommodation ladder which they were breaking out. In another, failure to raise the gangway while warping astern placed undue stress on the top platform hinge pins which worked loose and caused the gangway to collapse. Similarly, a number of disembarking personnel were injured when an aluminium gangway they were using broke in half. The weakness was traced to a cracked structural member which had deteriorated unnoticed over a period of time. In another case insufficient monitoring caused the inner rail of an accommodation ladder to become wedged against the davit arm when the tide fell. While attempting to free and lower the inner rail on its collapsible stanchions a crewmember, standing on the upper platform, managed to pull the rail free. However, the sudden release of the rail caused him to stagger backwards and he fell over the platform guard rail into the river. It was found that the guard rail ropes on the upper platform were only 65cm high rather than the recommended 1 metre.
Loss Prevention Bulletin 2
A further recent example concerned the death of a seaman when the hoist winch gearbox failed while he was rigging the accommodation ladder. The failure of the gearbox caused the lower telescopic section of the ladder to descend uncontrollably.
When the ladder reached the end of its travel the bolts holding the rollers sheared and the lower section fell into the water. At the time of the failure the seaman was standing on the lower section rigging stanchions and fell overboard. It was subsequently found that the gearbox had been incorrectly re-assembled following maintenance by the ship’s crew.
Moreover it is not uncommon for the Managers to be notified of injuries sustained by crew, stevedores, port officials, contractors or other visitors while embarking or disembarking. Steps, whether they are part of a ship’s access arrangements or a flight of stairs ashore, may increase the chances of slips and falls occurring. Given that gangways and accommodation ladders are also susceptible to movement by external factors such as cargo operations, tidal conditions, swell and other gangway users, the risks may be magnified.
Gangways and accommodation ladders are heavy and cumbersome pieces of equipment. Operating instructions should be posted in the vicinity of the boarding arrangements and it is essential that the personnel required to break out and rig ladders or operate lifting gear are sufficiently experienced, bearing in mind the possible consequences of a mistake.
Anyone unfamiliar with such tasks should be closely supervised by a responsible person until considered competent. If inexperienced crewmembers are required to assist with the rigging of a gangway or accommodation ladder, a risk assessment or job safety assessment should also be carried out beforehand in case additional measures to reduce the risk are necessary before commencing the operation. Suitable protective equipment should be worn as appropriate including personal floatation devices fitted with self activating lights, whistles and reflective material, and safety harnesses of the arrestor type rather than fall restraints. Fall arrestors should always be attached to suitable securing points fixed to the ship’s structure.
Surveyors carrying out condition surveys for the Club often report occasions where a vessel’s gangway or accommodation ladder was rigged incorrectly.
Safety nets are often the subject of such observations and are frequently found to be
secured to each side of the ladder along its entire length. This results in the net hanging uselessly below the steps instead of leading away to the side of the ship to catch anyone unfortunate enough to fall off.
Rope guard rails must be tight if they are to be effective, and all stanchions must be fitted in place and properly secured. Steps, handrails and platforms should be free of oil, grease and ice.
When landed on the quay, care should also be taken to ensure that the lifting bridle and/or davit arm is kept well above head height or moved clear as necessary.
As far as practicable the approaches to the ladder both on deck and on the quay should be free of hazards to allow safe access and egress to and from the vessel. Close attention should also be paid to any significant difference in height between the ends of the ladder and the quay or deck. This may mean placing and securing a portable step or steps in such locations to minimise the risk of slips and falls. Warning notices should be posted in such cases.
When gangways are placed on top of bulwarks, a suitable bulwark ladder should be used between the deck and the gangway. It should be adequately secured and all gaps between the top of the bulwark ladder and the gangway should be fenced off to a height of at least one metre.
Gangways and accommodation ladders should be adequately illuminated at night, particularly at each end. If there are no permanent fittings, portable lighting should be rigged.
A lifebuoy with a self-activating light plus a separate buoyant lifeline with a quoit or similar device attached should be stationed at the point of access ready for immediate use. Many vessels also place a small box containing a fire plan, stowage plan, dangerous goods list, stability details, crew list and other relevant information at the head of the ladder ready for use in an emergency.
Gangways should never be secured to a ship’s guard rails unless they have been designed for that purpose. If positioned through an open section of bulwark or railings, any remaining gaps should be roped off to a height of at least one metre.
Consideration should also be given to the angle of inclination, making sure that design limits are not exceeded. It may be necessary to provide alternative arrangements if the means of access is likely to become excessively steep. National legislation on this issue may vary, but in the absence of firm rules it may be prudent to observe UK regulations; a gangway should
not be used if its angle of inclination is more than 30° above or below the horizontal, similarly for an accommodation ladder if the angle is more than 55° below the horizontal, unless designed and constructed for use at angles greater than these.
A crewmember should be assigned to monitor the gangway or accommodation ladder as regular adjustment may be required due to the movement caused by tidal conditions and variations in draft and trim.
Regular monitoring is essential as changed circumstances may lead to a vessel’s access arrangements rapidly becoming difficult to negotiate.
The deck watch should also look out for potential dangers ashore such as bollards, tracks and cranes bearing in mind that most ladders are constructed of aluminium alloy and are easily damaged.
If the position of the ladder is such that cargo residues accumulate on a ladder and its approaches during a port stay, then the residues should be cleaned away regularly to prevent a slip/trip hazard. To assist those responsible for tending gangways and accommodation ladders, it may be worthwhile noting the times of high and low water on the sailing board each day.
It is a SOLAS requirement that inspection and maintenance of accommodation ladders and gangways be conducted periodically. Monthly inspection and maintenance should be included in the planned maintenance system and should always be carried out by a competent person in accordance with manufacturers’ instructions.
In addition to planned maintenance inspections, further checks should be made each time the ladder is rigged, looking out for signs of damage, distortion, cracks and corrosion.
Periodic inspections of accommodation ladders and gangways should incorporate the following:
The structure of the ladder should be closely examined for cracks, distortion, damage and corrosion, and repaired as necessary. If an aluminium ladder has fittings made of mild steel, these areas should be examined closely. Accelerated corrosion may occur if the two dissimilar metals come into contact, and deterioration of the separation material could lead to a severely weakened structure.
Bent stanchions should be replaced or repaired, and guard ropes inspected for wear and renewed where necessary.
Safety nets should be inspected for damage, actinic degradation and for the impregnation of grease, paint or chemicals which may affect their strength.
Moving parts such as sheaves, tracks, turntables, bearings and rollers should be free to turn, and greased as appropriate.
Lifting equipment should be inspected, tested and maintained according to a planned schedule. The condition of hoist wires is to be closely monitored for broken wires, corrosion or distortion, with particular attention paid to areas passing through sheaves.
Damaged wires should be replaced in line with the company’s wire discard criteria prior to their condition becoming unacceptable. In any event hoist wire replacement should never exceed 5 years. Hoist wires should be provided with a suitable test certificate prior to fitment and it is recommended that the date the hoist wires were last renewed is stencilled in the vicinity of the ladder for easy reference.
Hoist wires should be periodically treated with a suitable wire rope dressing over their entire length. Arrangements should also be made to examine the underside of gangways and accommodation ladders at regular intervals. It is often difficult to gain access to these areas in the course of normal activities and it may be necessary to turn the ladder over periodically to perform a detailed inspection.
Winch bed plates and supporting structures for sheaves and turntables should be inspected for cracks, distortion, damage and corrosion, and repaired as necessary.
Control levers/buttons and limit switches should be tested to ensure they are working correctly.
Operating instructions should be conspicuous, markings on the accommodation ladder or gangway as required by the flag state (such as the maximum safe loading by persons and by total weight) should be legible, and control levers or buttons should be clearly marked.
All inspections, maintenance work and repairs should be recorded in the planned maintenance system in order to provide an accurate detailed history for each appliance.
Checklists may be used as an additional safeguard when rigging gangways and accommodation ladders.
(content courtesy of West P and I)
Tyne Gangway completes Accommodation Ladder System order on time & in budget. Designed and manufactured in our Tyne Facility the 2 off ship sets were manufacture to replace old systems on Two Australian RoRO Vessels.
Tyne Gangway completes manufacture of a 50 metre Aluminium Bridge in record time. The DNV approved structure was designed and built in less than 7 weeks and will be used to span a steel jacket of the coast of Germany. Following completion of the 3 month project the Bridge will be used as a multi purpose gangway for accessing the Clients Heavy Lift Vessels.
- Telescopic Gangways & Wind Turbine Access/Walk to Work Systems
- Modular Gangways
- Marine Column &Tower Gangways
- Carousel Access Systems
- Onshore & Offshore Gangways and Bridges/Walk to Work systems
- Dolphin Access Gangways
- Pontoon Access Gangways
- Self-Levelling Stepped Gangways – Cruise Access
- Accommodation Ladders
- Naval Brows
- Shore Type A Gangways
- SHALA Gangway
- SALA Gangway
- Type C Gangway
- Bulwark Ladders
- Bespoke Marine Access
- Gangway Accessories